Chipped worktop, bath, tile or door in London? We repair chips on hard surfaces on site, rebuilding the missing material and colour-matching so the repair is invisible and hard-wearing. Most chips are fixed in a single visit, with no need to remove or replace the whole item.
What we repair
We repair chips on worktop edges and hob cut-outs, acrylic and enamel baths and shower trays, ceramic and porcelain tiles, sinks, doors, window sills and furniture. Our chip repair service restores both the appearance and the water-tight integrity of the surface, so a chipped worktop stops soaking up moisture and a chipped bath stops rusting or staining. See also our worktop repair, bath repair and scratch repair pages in London.
What is fixable — and what is not
The large majority of chips are repairable, including edge chips on laminate and stone worktops, impact chips in baths and shower trays, corner and grout-line chips on tiles, and chips on painted or veneered furniture. We rebuild the missing area with a colour-matched filler, then shape, cure and polish it to match the surrounding finish. Repairs are less likely to be worthwhile where a surface is failing across a wide area — for example a bath with widespread crazing, a worktop delaminating along its full length, or a tile that has shattered into several loose pieces. In those cases we will tell you honestly if replacement is the better value, rather than carry out a repair that will not last.
Chip repairs by surface type
Different materials chip in different ways, and each needs a slightly different repair. On laminate worktops the chip usually exposes the chipboard core along an edge or around a hob or sink cut-out; we rebuild the missing laminate and colour-match the pattern so moisture can no longer get into the board. On stone and quartz worktops impact chips tend to appear on edges and corners, and we fill, shape and polish these to match the stone’s colour, sparkle and sheen — see our stone repair and marble repair pages for wider stone restoration. Acrylic and enamel baths and shower trays chip on impact and around waste holes, where the priority is a water-tight, stain-proof rebuild. Ceramic and porcelain tiles chip on corners and grout lines, while painted or veneered furniture and doors chip on edges and handles — and where damage is widespread on a painted item, an on-site respray often gives a better finish than spot repairs.
How the repair works and how long it takes
Our mobile technicians arrive fully equipped and complete the work on site. A single chip is usually filled, colour-matched and polished within a couple of hours, and most surfaces are ready to use the same day once the repair has fully cured. We match to your exact colour, sheen and, where relevant, the stone pattern or wood grain, so the finished repair blends in and is hard-wearing under daily use.
Who we work with
Homeowners protecting kitchens and bathrooms, landlords and letting agents avoiding deposit disputes, and kitchen fitters, hotels, Airbnb hosts and facilities managers needing fast, low-disruption fixes.
Areas we cover
We cover all of London and Greater London, plus the surrounding Home Counties and Essex. Because the work is completed in place, there is no need to remove or transport anything. This page is part of our wider hard surface repair across London service.
Why choose Shazam Repairs
Repair is faster, greener and less disruptive than replacement. Our technicians are experienced across domestic, commercial and high-end work, colour-match to your exact surface, and finish every repair to blend in seamlessly. Most jobs are completed in a single visit and ready to use the same day.
Chip repair FAQ
Will the repair be visible?
On the great majority of surfaces the repair is invisible at normal viewing distance. We colour-match to the exact shade and finish, and blend the surrounding sheen so the repaired area does not stand out.
Can you repair a chip in an acrylic or enamel bath?
Yes. Chips in both acrylic and enamel baths and shower trays are among the most common repairs we carry out, restoring the surface so it stays water-tight and does not stain or corrode around the damage.
How do I get a price for my chip?
Send us a couple of clear photos of the damage and we will come back with a fast, no-obligation quote. Photos let us confirm the surface type and the best repair before we visit.
Can you match a chip in a patterned stone or quartz worktop?
Yes. We match not just the base colour but the sheen and, on speckled or veined stone and quartz, the pattern around the chip, so the repair reads as part of the surface rather than a patch.
How long will a chip repair last?
A properly cured, colour-matched repair is hard-wearing and made to stand up to normal daily use. We only recommend a repair when it will give lasting value — where a surface is failing more widely, we will tell you honestly rather than carry out a fix that will not hold.
Get a fast, no-obligation quote
Send us a few photos of the chipped surface and we will get straight back to you with a no-obligation quote. Most chips are repaired in a single visit, anywhere in London.
